CUMMINS B5.9 180 31 BS-III

Model                                                 ;    CUMMINS B5.9 180 31 BS-III
Type                                                   ;     water cooled direct injection turbo charged
                                                                   intercooled diesel engine with viscous fan   
No,of cylinders                                ;     6 inline
Bore/stroke                                      ;    102mm/120mm
Capacity                                            ;    5883 cc
Max.Engine output                          ;    134 kw at 2500 rpm as per MOST/CMVR/TAP-115/116
Compression ratio                          ;     17.6:1
Firing order                                       ;     1-5-3-6-2-4
Tappet clearance                            ;      intake 0.254 mm
                                                                     exhaust 0.508 mm
Torque                                                ;      2.5 mkg 
Air fliter                                              ;      dry type remote mounted
Oil filter                                              ;       full flow spin on paper type
Fule filter                                            ;       pre and fine filtaration with watre separator
Governor                                            ;       built in centrifugal
Turbo charger                                  ;       HOLSET
Capacity of cooling                         ;       27 litre (total)
system
Crankcase iol capacity                  ;       Max 14.3 liter, min 12.3 liter
Weight of engine                              ;       416 kg (dry)(with flywheel & alternator,less
                                                                       starter & air compressor)
Radiator frontal area                      ;       4227 sq cm
Coolant                                               ;        water and ethyline glycol in 1:1 ratio premixed

CLUTCH
                                                              ;        single plate dry friction type
Outside diameter of clutch
lining                                                   ;         380 mm push type
Friction area                                     ;         750 sq cm approximately
Type of actuation                             ;         Hydraulically actuated with penumatic assistance

GEAR BOX
Model                                                   ;        G-750
Type                                                     ;         synchromesh on all forward gears and constant
                                                                         mesh on reverse gear
No of gears                                        ;          6 forward 1 reverse
     

Vane Pump

Vane Pump

Selection Criteria for Vane Pumps

·         Engine H.P., Torque and Max.RPM

·         Pressure and Flow in system.

·         Mounting and drive requirements

Features

·         Compact and light weight construction

·         Easy to adopt and mount with adjustable flow features between to 9 to 16 LPM with buit in Flow control and pressure relief valve.

·         Capable of high pressure from 70 to 150 Bar

·         Sealed bearings with excellent and safe protection for mud durability and can perform in amphibian vehicles

·         Hydraulic Power steering system is supplied with a nearly constant oil flow regardless of engine speed

·         Minimal power consumption

·         Positive displacement type pump